Manual Unloading of Cargo

This topic is valid for SnowRunner only.

To set up manual unloading of the cargo, you need to create an additional zone that will interact with the player. This zone must be placed around the target cargo delivery zone (specified in the globalZoneId field, see 5.16.1.1 above).

Typically, the setup of these two zones is similar to the following:

NOTE: In the case of manual unloading, the delivery zone itself can be also located on some platform or eminence.

The manual unloading zone is created as a regular zone with an empty props section:

After the creation of this manual unloading zone and placing the delivery zone inside it, you need to specify the link to the manual unloading zone in the Manual Unloading Settings > Interaction zone Uid: field, see below.\ \ NOTE: The link to a delivery zone itself must be specified as usual, in the globalZoneId field.

For our example, the setup may be the following: